ARCTIC P9 Max Black High-Performance 92 Mm PWM Case Fan, 450-4300 RPM, Optimized For Static Pressure, 0dB Mode

About P9 Max ● WIDE RPM RANGE: Thanks to the 4-pin connector, the speed can be controlled via PWM. Below 5 % PWM the fan stands still, above 5 % it is infinitely variable between 450-4300 rpm ● FLUID DYNAMIC BEARING: Long service life, silent operation at low speeds and brute power at maximum speed. ● DESIGNED FOR PERFORMANCE: Due to the high static pressure, the fan guarantees efficient cooling even with increased air resistance. Suitable for use on heat sinks & radiators ● TECHNICAL DATA: Fan speed: 450-4300 rpm, Airflow: 58.25 cfm | 98.97 m³/h, Static pressure: 6.17 mmH₂O, Pin: 4-pin fan connector Powerful Cooling The P9 Max is a powerful 92 mm fan with 450 to 4300 rpm.The fan delivers a static pressure of 6.17 mmH2O and generates an airflow of up to 58.25 cfm. It offers precise control of the fan speed via pulse width modulation (PWM) and is highly efficient at 0.34 A. In addition, it has a 0 dB mode for silent operation in IDLE. Extremely Wide Speed Range The P9 Max enables precise fan speed via pulse width modulation control, which can be adapted to the individual cooling requirements. The P9 Max enables silent operation when only a low airflow is required and provides a high performance level if needed. Optimised for High Static Pressure The P9 Max delivers a focused airflow and guarantees a good airflow even with particularly high static pressure. Therefore, the P9 Max is also specially suitable for use on heat sinks, radiators, pinholes and filters. 0 dB Mode - Zero rpm The speed of the fan can be throttled down to a standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. This enables the P9 Max to be extremely flexible in adjusting the speed to optimally regulate the airflow for every case. Virtually Silent due Fluid Dynamic Bearing As a special feature, the P9 Max is equipped with ARCTIC's proven Hydrodynamic Bearing. This enables the virtually silent operation at low speeds. At maximum speed, brute performance is still guaranteed. To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers.